Here are some links to the exact products needed for a "hotter" setup.

 

Motor:  Endoplasma http://www2.towerhobbies.com/cgi-bin/wti0001p.pgm?Q=1&I=LXW933&P=7

 

Gearbox:  Great Planes GD-600 http://www2.towerhobbies.com/cgi-bin/wti0001p.pgm?Q=1&I=LXSL79&P=7

 

Extra Spur Gears: http://www2.towerhobbies.com/cgi-bin/wti0001p.pgm?Q=1&I=LXUA38&P=M

 

10 tooth Pinion Gear:  (A must if running 10 cells on Endoplasma)  http://www.newcreations-rc.com/  or http://www.modelelectronicscorp.com/

 

Aeronaut  52 mm Yoke (what holds the prop blades on the shaft)  http://www.newcreations-rc.com/

 

Aeronaut 12 x 8 CAM prop :  http://www.newcreations-rc.com/

 

 

The Pinion gear is a friction mount not set screw:  these tools make it easy and are a must for electric flyers

 

Pinion Gear puller:  Makes taking off pinioin gears easy http://www.newcreations-rc.com/  go to tools link

 

Pinion Pusher:  Makes pushing pinion gears on easy http://www.newcreations-rc.com/  go to tools link

 

10 cell 2400 nicad  end to end pack or 10 cell 3000 Nmh  http://www.newcreations-rc.com/

 

BACK TO MAYHEM MANTA